Tacker

Myson underfloor heating board is a PS20 (EPS100) with a webbing foil bonded to the top surface.  This webbing foil acts as the protection layer and, after laying, all joints are taped to maintain integrity.  A 50mm grid is marked onto the foil to assist in the positioning of the Myson Diffu-Pex underfloor heating pipework.

The pipe is positioned in place and then a barbed ‘U’ clip is fixed over the pipe by means of a Myson Tacker.  The barbs snag on the webbing material holding the pipe until the screed or concrete is laid.

This is a fast and effective method of anchoring the Myson Diffu-Pex underfloor heating pipework and is very flexible allowing bot spiral and snake laying patterns.