The Myson Decor range has made a powerful impact on the world of interior design since its introduction. It has developed out of today's fresh thinking on radiators, seeing them as decorative items not just as heating devices.
All Decor radiators feature triangular header tubes and flat heating tubes with a mix of configuration depending on your Decor style. We also offer a wide range of connection and fixing options to suit all types of installations.
The Decor stock range comprises 69 standard sizes and we can even custom make Decor radiators to suit your colour scheme, Please download the FULL brochure to view the entire range of special sizes.
Please note: The special sizes in the brochure have a 6-8 week lead time. For stocked, 2-3 day delivery products, please refer to pages 6 and 7.
Sizes and Outputs
Click on the types below to show the sizes and outputs for each radiator:-
Technical Drawings and Info
Click on the types below to find out more technical information:-
All MYSON DÉCOR radiators are fitted with the following connections:
H 4 x 1/2 inch, including plug and vent (H11, H22 and H28)
V 2 x 1/2 inch BOE, including plug and vent (V10 and V20)
T 2 x 1/2 inch BOE, including plug and vent (TS4 2000mm high)
T 6 x 1/2 inch, including plug and vent (TS4 600mm high)
All TS4 (600mm high only) models must have the supplied diverter fitted inside the radiator prior to installation.
N.B. For H11, H22 and H28, the use of TBSE (Top Bottom Same End) connections is not suitable.
Every MYSON DÉCOR radiator is tested to a pressure of 6 bar (87 psi) and is suitable for a working pressure of up to 4.6 bar (66.7 psi).
N.B. Because of the narrow waterways in longer DÉCOR TS4 radiators, care must be taken to ensure that the system pressure is sufficient to feed the whole radiator. Pressure loss data can be supplied if required.
All MYSON DÉCOR radiators are supplied with the appropriate standard brackets. V10, V20, H11, H22 and TS4 radiators are supplied with wall mounting brackets and the H28 radiator is supplied with floor
mounting brackets only.
Mounting feet for floor fixing and support for ceiling fixings can be supplied for the V10 and TS4 (2000mm high) radiator, only at the time of ordering.
Declaration of Performance (DoP)
Rettig ICC products are CE-marked and the Declaration of Performance (DoP) of Rettig ICC and its reference documents, Annexes D and Annexes M describing the detailed performance of the products, are available according to the Construction Products Regulation.
The DoP of Rettig ICC, including panel radiators, decorative radiators and towel warmers, can be downloaded here.
Please contact Customer Services on 0845 4023434 for specific product Annexes.
Thank you for purchasing a Rettig UK Ltd (Rettig) product. Your Rettig product has been designed and tested to give you many years of trouble-free service. For your additional peace of mind, Rettig gives the following Warranty. Your statutory rights are not affected by this Warranty.
Subject as provided below, Rettig warrants to the original purchaser at the original installation site that its products will be free from defects in materials and workmanship for the following periods:
• Panel Radiators: 10 years from date of purchase.*
• Radiators (ULOW-E2): 2 years from date of purchase.
• Fan Convectors: 2 years from date of purchase.
• Radiator Valves: 2 years from date of purchase.
• Hydronic Underfloor Heating: 10 years for the pipe from date of purchase. 2 years on controls and 12 months on the UFH pump from date of purchase.
• Electric Underfloor Heating: 10 years from date of purchase (except programmer and sensor).
• Electrical Radiators: 2 years from date of purchase.
• Towel Warmers - Hydronic: 5 to 10 years from date of purchase depending on product type.
• Towel Warmers - Electric: 2 years from date of purchase
• Controls: 2 years from date of purchase.
*Any panel radiator installed in high humidity areas (such as bathrooms etc.) are subjected to a twelve month warranty only.
The original purchaser’s remedy for breach of this Warranty is expressly limited to repair or replacement of any part or parts found to be defective under conditions of normal service and use during the above Warranty period and does not extend to Rettig being liable for any incidental, special or consequential damages or losses whatsoever, such as loss of use of the product, inconvenience or lost profits.
This Warranty does not cover any defect, damage or malfunction in the product which is due to: failure to comply in any respect with Rettig’s installation, maintenance or operating instructions; faulty storage, handling, installation or repair; mis-use; neglect; accident; abuse; or general wear and tear.
Before this warranty can be activated, the original purchaser will be required to prove, with supporting documentation, the date and place of purchase, as Rettig may need to conduct its investigation into the alleged defect. This should be within 28 days of the date when the defect was discovered or ought to have reasonably discovered the defect.
Rettig reserves the right to make a reasonable charge for inspecting and testing any product which is subject to a Warranty claim and the rights conferred by the Warranty are conditional upon the payment of such charge. The charge may be made, at Rettig’s discretion, either before or after the inspection and testing of the product. In the event that it is established to Rettig’s reasonable satisfaction that a valid Warranty claim has been made in respect of the product, then any inspection charge which has been paid will be refunded in full by Rettig.