Fan Convectors
Q. How do I join my Wallstrip elements together?
Q. Can I cut my Wallstrip elements to any size?
Q. Can the Hi-Line fan convector heaters be installed at any height?
Q. Where can I buy spare parts for my Myson convector heaters?
Q. How much do Myson convector heaters cost to run?
Q. Do Myson convector heaters operate when the central heating system is switched off?
Q. Can I use my Myson convector heaters with an external room thermostat?
Q. How do I size my Myson convector heaters?
Q. Can Myson convector heaters be used in combination with other heat emitters?
Q. Is there a fault-finding guide?
Q. Can Myson convectors be installed in any type of heating system?
Q. What controls can be found on the Myson convector range?
--------------------------------------------------------------------------------
Q. How do I join my Wallstrip elements together?
There are two methods of joining the Wallstrip lengths together, the first is by soldering and the second is by using compression fittings.
Back to Top
Q. Can I cut my Wallstrip elements to any size?
Yes, we sell stand 900mm, 1200mm, 1500mm and 1800 mm lengths, which may be cut to size using a sharp hacksaw.
Back to Top
Q. Can the Hi-Line fan convector heaters be installed at any height?
No, the Hi-Line must be installed no higher than 2.13 metres from the base of the unit to the floor. If the Hi-Line is installed higher than the 2.13 metres the output may be affected.
Back to Top
Q. Where can I buy spare parts for my Myson convector heaters?
All Myson spare parts are available from our Customer Service Department on 01482 713927.
Back to Top
Q. How much do Myson convector heaters cost to run?
The running costs of Myson convector heaters are less than the costs of running a 60 watt light bulb. Myson convector heaters utilise the heat source from your central heating system and therefore the only additional cost is the fan. On the Kickspace range, the electric only and Duo models do cost more to run than the central heating system models as they rely on direct electric heating.
Back to Top
Q. Do Myson convector heaters operate when the central heating system is switched off?
Myson convector heaters will only provide heat when the central heating system is switched on and hot water is flowing through the convector. It is possible to allow the fan to run in the summer allowing a current of refreshing air around the room by activating the summer/winter switch. On the Kickspace range, the electric and Duo models will operate independently of your central heating system.
Back to Top
Q. Can I use my Myson convector heaters with an external room thermostat?
Yes, all models may be used in conjunction with an external room thermostat.
Back to Top
Q. How do I size my Myson convector heaters?
It's important that all Myson convector heaters, including Kickspace, Lo-Line, Hi-Line and Slim-Line are sized on normal fan speed setting. If not, you will reduce the life of the fan and impair the unit's performance.
Back to Top
Q. Can Myson convector heaters be used in combination with other heat emitters?
Yes, but it is preferable to provide a separate circuit for all Myson convector heaters to ensure adequate flow of water to the units.
Back to Top
Q. Is there a fault-finding guide?
For fault-finding assistance please do not hesitate to contact our Customer Service Department on 01482 713927.
Back to Top
Q. Can Myson convectors be installed in any type of heating system?
No, we recommend Myson Convector products are installed onto a two pipe pumped circulation central heating system. For optimal performance they require a continuous flow of hot water through the heat exchanger. Micro bore systems are not recommended. For any queries regarding the suitability of your heating system, please contact our Customer Service Department on 01482 713927 for further advice.
Back to Top
Q. What controls can be found on the Myson convector range?
Lo-Line / Slim-Line – all Slim-Line and Lo-Line models come with a summer/winter switch, a normal / medium / boost fan switch and an integral thermostat as standard
Hi-Line – All Hi-Line models come with an on/off switch, summer/winter switch and a normal / boost fan switch as standard.